Showing posts with label Cascadia. Show all posts
Showing posts with label Cascadia. Show all posts

Saturday, June 2, 2012

Camping Mess Kits

Inspired by a little craft from my years in the Girl Scouts, and the desire to have a few ready-to-go camping items available to pack up for spur of the moment trips, I made these netted mess kits. It was super fast and easy with just a few items. It makes it easy to pack dishes and after washing it is a place to hang them for fast drying out in the woods! 






Materials:
-White mesh fabric (At least 1/2 yard to work with)
-Cording or thick yarn (about a yard)
-Thread 
-Sewing machine 
-Camping dishes










Step One: Sew the right side
The bottom of the bag will be the fold already in the fabric, so we need to sew the sides and the edge that the cording will go into. I sewed the right side together first, then placed the dishes onto the fabric to cut it to size. 



Where the scissors are is the top of the bag, and if you look closely you can see the right side is already sewn. But do not sew the left side up yet, because you need to sew the top edge into a loop where the cording will go first.


Step Two: Sew the top loop
In the picture above I trimmed a couple inches off the top of the bag. Now you will fold down the top edge about an inch and sew it down, making sure all the raw seems are inside the bag. The yarn in the picture below is to show where the cording will go. 



Step Three: Sew up the left side
With the bag inside out, you will sew up the left side to complete the bag, but stop a half inch from the top, so you don't sew up the loop's opening where you will feed the cording through. Make sure you reinforce the area you are sewing near the loop openings, so it won't tear open. Now turn the bag right side out and you are ready to feed the cord through the top loop.




Step Four: I used thick tape and Gorilla Glue to secure the two ends of the cording, but you could use almost anything. Add dishes and hit the road! 






What every good crafter needs in her supplies: 


xoxo





Sunday, February 12, 2012

Cascadia Wallhanging

I was commissioned to created a wallhanging for a friend in the form of a Cascadia flag, and we decided on using wood panels for each stripe to keep that woodsy Cascadia theme. It turned out pretty cool and could definitely be used to create many different styles of wall art.

Materials:
  • Thin wood panels
[I chose three 36" x 6" for the main part and three smaller 12" x 3" for later attaching the large three panels together. All about 1/4" thick]
  • Acrylic paint
  • Large brushes
  • Mod Podge
  • Wallhanging hardware + 1/4" nails
  • Hammer & screw driver

-------------------

Step One: painting each board




-------------------

Step two: Adding the center image (in this case, a Douglas Fir)

I printed out the image in sections, carefully cut out the tree, and used a tiny bit of tacky glue to glue it down. Then I used my darker green acrylic paint and layered it onto the tree, over the glued down paper image. This helps because I'm not very good at free handing images, especially ones that I want to be really precise. And after you are done painting and it is completely dry, layer Mod Podge over the entire piece to give it a more even texture and to make sure the tree is secure.


-------------------

Step Three: Attaching the boards and adding hardware

I used three smaller boards and, using three nails per board, nailed them to the larger piece to attach. Then I attached the hanging hardware and wire. There are many different ways to hang a piece like this, I just prefer the wire so it is more easily adjusted on the wall.



-------------------

Completion!